When using Xperia at home, a Wi-Fi router that can be used in terms of communication speed and data saving.The Wi-Fi router is very convenient, but when used in a room or toilet on the second floor away from the router, communication is delayed because it is too far away from the router, and the video playback of YouTube has been cut off.Sometimes it will be broken.
If you use a Wi-Fi relay machine, you should be able to enjoy videos and the Internet at a comfortable speed by extending the radio wave reaching distance in the house.Let's connect the Wi-Fi router "WSR-2533DHP" of the buffalo that I introduced earlier with the company's direct insertion type wireless LAN repellent "WEX-1166DHPS".
WEX-1166DHPS is IEEE802.Compatible with 11a/b/g/n/AC communication, 2.It is a wireless LAN relay device that can use the 4GHz band and 5GHz band at the same time.2.The 4GHz band and the 5GHz band have two transmission and receiving antennas, and uses 11ac, a high-speed Wi-Fi standard, up to 866 Mbps, and up to 300Mbps communication is possible even if the conventional standard 11N is used.
The body size is 65 x 40 x 95mm and weighs about 138g.Since it is more compact than the number of Wi-Fi routers, and because the outlet comes directly from the main unit of the repellent, it can be inserted directly, so it can be installed anywhere where there is an outlet.
When it comes to direct insertion, will it block the next outlet?I'm worried, but since it is small and an outlet is placed at the last minute of the main unit, the protruding from the main unit is about 1cm.If it is a standard type two -piece outlet, it is a well -designed design that does not block the above port.
WEX-1166DHPS also has a wired LAN terminal.It can be used as an Ethernet converter, and can be used as a Wi-Fi by connecting a PC or a wired LAN device such as a television in a distant place from the base unit with a LAN cable.
The setting is very easy.First, install WEX-1166DHPS near the Wi-Fi router "WSR-2533DHP", which is the master unit.Actually, it will be installed separately, but it is easier to put it nearby because it will be reliable and easy to set when setting.
Set the "Auto/5GHz" switch to "Auto" and insert WEX-1166DHPS into an outlet.Next, press the WPS button for about 2 seconds or more, confirm that the WPS lamp flashes, and then press the AOSS/WPS button on the main unit to connect.If the "main unit connection lamp" and "WPS lamp" light up, the setting of the relay device is completed.
All you have to do is set up a repeater in your favorite place.However, the worrisome thing here is how much wireless reaches and where to put the relay device.The relay device has an LED that displays radio wave intensity on each of the main unit and the slave unit, and although the radio wave status can be seen from the lighting / flashing pattern, it is invisible to see if it is actually connected while installing it.It is a very broken bone.
In such a case, Buffalo's smartphone app "STATIONRADAR" is convenient.If you install the stationRadar on Xperia, you can see the communication status of the master unit, relay device, and handle at a glance.
Messages will be displayed depending on where you installed, such as "Please bring the reporter closer to the master unit" or "Please bring the relay device closer to the handset", so adjust the distance.OK if "good" is displayed.It is very convenient to be able to find the installation location while checking the site with Xperia.
As for the structure, the relay method is "parent unit-relay machine" and "relay machine-slave unit" communication, respectively..Two bandwidth, 4GHz band and 5GHz band can be used simultaneously.There is an advantage that the communication speed that occurs in a system that relays only one bandwidth is reduced.
When the radio waves are expanded evenly throughout the whole, the speed of the radio wave has not reached due to the distance and obstacles, and the speed has dropped, and the WEX-1166DHPS determines the position and distance of the slave unit, and toward the child unit.It seems that it has the effect of improving transfer speed and stability by providing "beam forming" that delivers properly.In order to use the beam forming, the Xperia side needs to be supported.
It also supports "SSID for relay device".For example, from the main unit whose radio waves have weakened, it does not automatically switch even though the radio wave is approaching a relay machine!In such a case, you can manually switch the connection to the relay machine SSID.
At home, while using the wireless LAN of the Wi-Fi router, the wireless LAN connection has been released at a distance, so you may inadvertently consume a mobile communication packet.So, if there is a place where "Wi-Fi is difficult to reach" here, the introduction of a relay may solve the problem.
