A humidifier corresponding to "UV-C Light Escinance" released by Xiaomi to Japan.How good is this humidifier?And please refer to the article here for how cheap the price is (6,800 yen).I think it will be irresistible because I want it.
I ordered a humidifier on September 30 and arrived on October 5.As of October 6, if you are an Amazon Prime member, it will be delivered on the same day.It means that the stock is in place.Then, I would like to review it immediately!
It is a simple design without wasted.Four.The size is reasonable because it is a 5 -liter large -capacity model.However, the weight was very light for the appearance, and it was not difficult to move the place.
The tank part is removable.Because the insertion port is large, there is no need to worry about spilling when pouring water with a kid.In addition, the tank is very easy to remove and light, so you can put water directly and set it.If it is full, it will be quite heavy.
When the tank is removed, the lower part is like this.It has "evaporator", "drain pipe", "UV-C light", etc.
Water enters to the place where it is written as "maximum".It is quite a large amount because it is two or more large plastic bottles.If you enter water full, it may be safe to put it in several times.
According to the official, 12 hours to 15 hours consecutive humidification is possible, so the optimal humidity is secured all day, including while sleeping in one water supply.Even those who are worried about drying but are troublesome to supply water is safe.
The Xiaomi logo mark is printed on the upper lid.Lock/unlock is a simple slide type.The steam outlet is on the left side from the front.
The window that can check the remaining amount of water is illuminated by light, so it is easy to see even in dark places.
At the bottom of the front, "low -speed", "medium speed", "high speed", "humidity (maintaining 40-70 % humidity. Humidity setting is possible with Mi Home)" and "Power ON"./OFF button is lined up vertically.When switched to high -speed settings, the amount of steam is visibly improved.It can be said that it is suitable for use in a large room.Because it is well removed, it is comfortable without any discomfort even if it is directly applied to the face.At this point I realized that it was a good shopping.
If you use two buttons, you can use it as a "high -performance humidifier", but the Xiaomi humidifier is compatible with IoT.In other words, it leads to the Internet.From here, I would like to step further and explain how to set up humidifiers and smartphones.
First, make sure that the Wi-Fi lamp on the back of the main unit is lit.Press the button under the lamp short to ON/OFF.If you press it for a long time, the setting will be reset and it will be lit.
Open the Google Play Store with a smartphone and install Xiaomi's official app "Mi Home".
After installation, open Mi Home, select "Japan" from the country and region and save it.
A MI account is required to use MI Home, so select "Create an account" from the bottom of the sign -in button.
After confirming that the country is "JAPAN", enter the email address.Check out "I read Xiaomi's Terms of Use and Privacy Policy and agree with them."
I check it out that I'm not a robot.
Select an image according to the instructions and select confirmation.
Set the password for logging in and next.
You will receive an email from Xiaomi to the registered e -mail address.When I chose "Activate Account" in the email, I got an error.
Similarly, if you get an error, copy the confirmation address in the same email and enter it directly into the browser.It takes a little time for the screen to switch, but if there is no problem, the above image should be displayed.
After registering the MI account, return to the Mi Home login screen and enter the registered email address and password."User AgreeMent and Privacy Policy.Don't forget to check the part of] and sign in.
Select "Add Device" from the upper right.
The above image is displayed, so when you check the contents, next (it will not be displayed if you have already allowed location information).
Select "authority" from the Mi Home application setting screen.
Select "Location Information" from the list.
Select "Permit only while using the app".
After completing the settings, when you return to the Mi Home app, the humidifier is displayed in the list of "Add Device", so select (if not displayed, check if the Wi-Fi lamp on the back of the main unit is lit).。
Select "Connect to other routers".
Select the Wi-Fi router you are using, enter the router password and select OK.
Select "Connection" when switching to the connection confirmation screen to the device.
If you decide whether to use the room to use, the name of the humidifier, or the family to share it with the family, the setup of smartphones and humidifiers is complete.
When the setup is completed, you will be able to control the humidifier via Mi Home and check the humidity and temperature.If the mode is set to "humidity", a certain humidity can be specified between 40 % and 70 %.In addition, if you use the schedule function, you can use it according to the room where the power is turned on from 23:00 to 7:00.It also supports detailed adjustments such as turning off LED lamps and ON/OFF of notification sound.I'm glad that you will notify you when the water is gone.
Xiaomi humidifier that can be used in energy-saving and hygienic in "UV-C light disinfecting".If it is a corner, let's use it as an IoT home appliance.In the future, it will be easier to set up when purchasing Xiaomi's IoT home appliances!
>>加湿器の購入はコチラから
Contents written in the article
Main specifications of Xiaomi mi smart humidifier
| Mi スマート抗菌加湿器 | |
|---|---|
| 定格電圧 | 220 V |
| 定格電力 | 25 W |
| 重量 | 約1.9kg |
| 加湿能力 | 300 ±50 mUh |
| 定格周波数 | 50 Hz |
| 水タンク容量 | 4.5L |
| 作動時ノイズレベル | 38 dB 以下 |
| 製品サイズ | 190 × 190 × 353 mm |
| 同梱品 | 本体、取扱説明書 |
| 製品番号 | SCK0A45 |
Category related to this article
Xiaomi
